LAZER Z DIESEL 96"
Zero Turn Mowers
More power. More features. More productivity.
Model LZS88CDYM96RW0
Manufacturer Exmark
LAZER Z DIESEL 96" LZS88CDYM96RW0
Description
When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.
Features
Improved Handling
Reduced Maintenance and Service
Fuel Capacity
Hydraulic Deck Lift
Tire Size / Ground Speed
Productivity
Specifications For Model : LZS88CDYM96RW0
-
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
-
Drive Tires
26x12-12, 6ply Multi Trac®
-
Front Caster Tires
15 x 6.0-6, smooth-tread, semi-pneumatic.
-
Caster Forks
.50" thick caster yoke arms.
-
Tractor Frame
Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
-
Steering Control
Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
-
Parking Brake
Lever-actuated internal wet disc brake.
-
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
-
Electrical
12-volt battery with 55-amp alternator.
-
Onboard Intelligence
RED Technology
-
Standard Features
12-volt plug-in, engine hour meter and cup holder
-
UPC
193308000824
-
Engine Brand
Yanmar
-
Engine Model
3TNV88C
-
Engine Displacement
1642
-
Engine Series
TNV
-
Fuel System
Common Rail Diesel
-
Engine Speed
3,000 RPM
-
Air Filter
Heavy-duty canister air filtration system with electronic vacuum sensor
-
Fuel Type
Diesel
-
Fuel Capacity
12-gallon (45.4-L), side fuel tanks
-
Fuel Indicator
Yes - mechanical float type
-
Drive
Hydro-Drive
-
Drive Description
Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler.
-
Speed
Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse.
-
Carb Compliant
Yes
-
Deck Lift
Hydraulic
-
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
-
ROPS
2-post foldable ROPS standard with seat belt and latch.
-
PTO Engagement
Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
-
Drive Wheel Release
Allows unit movement without engine running.
-
Engine Spec
DTR5
-
Width / Cutting Deck
96"
-
Deck Style
Floating Deck
-
Deck Style Description
Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles included.
-
Deck Construction
7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
-
Blade Tip Speed
Approximately 18,500 fpm
-
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
-
Blades
4 Blades at 24.50" Length
-
Width
101.2 in. (257.0cm), 72.5 in. @ 3 in. HOC when folded
-
Length
97.2 in. (246.9 cm)
-
Height
71.8 in. (182.4 cm)
-
Curb Weight
2650