LAZER Z E-SERIES 60" DECK
Zero Turn Mowers
Model LZE810GBV604A3
Manufacturer Exmark
LAZER Z E-SERIES 60" DECK LZE810GBV604A3
Description
The perfect choice for professional landscaper who want the innovative and commercial-grade quality of a Lazer Z zero-turn riding mower, but in a value package. The Lazer Z E-Series zero-turn mower features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models.
Features
Hydro Drive, Simplified
Unibody Frame
Less Time At The Pump
On-Board Diagnostics
Fewer Grease Points
Ultracut Series 4 Deck
Rear Discharge Deck
Tool-less Belt Removal
Specifications For Model : LZE810GBV604A3
-
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
-
Drive Tires
24 x 12-12, 4 ply Super Turf®
-
Front Caster Tires
13 x 6.50-6, smooth-tread, pneumatic.
-
Caster Forks
.50" thick caster yoke arms.
-
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
-
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
-
Parking Brake
Lever-actuated disc brake.
-
Seat
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
-
Electrical
12-volt battery with 15-amp alternator.
-
Standard Features
Engine hour meter and cup holder
-
Engine Brand
Vanguard
-
Engine Model
810CC
-
Engine Displacement
810
-
Engine Speed
3,750 rpm
-
Air Filter
Heavy-duty canister air filtration system
-
Fuel Type
Gas Carbureted
-
Fuel Capacity
8-gallon (30.3-L) single fuel tank with single fill location.
-
Fuel Indicator
Yes - electronic Sender
-
Drive
Hydro-Drive
-
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
-
Speed
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
-
Carb Compliant
No
-
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
-
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
-
ROPS
2-post foldable ROPS standard with seat belt and latch.
-
PTO Engagement
MagStop electromagnetic 200-ft-lb clutch with spot brake
-
Drive Wheel Release
Allows unit movement without engine running.
-
Engine Spec
3037
-
Width / Cutting Deck
60"
-
Deck Style
Floating Deck
-
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
-
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
-
Blade Tip Speed
Approximately 18,500 fpm.
-
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
-
Blades
3 Blades at 20.50" Length
-
Width
72.8 in. (184.9 cm)
-
Length
83.1 in. (211.1 cm)
-
Height
70.5 in. (179.1 cm)
-
Curb Weight
1279