Lazer Z S-Series 25.5 HP Kawasaki 60"
Zero Turn Mowers
More power. More features. More productivity.
Model LZS801CKA60RA1
Manufacturer Exmark
Lazer Z S-Series 25.5 HP Kawasaki 60" LZS801CKA60RA1
Description
With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Features
Less Time At The Pump
On-Board Diagnostics
Ultracut Series 4 Deck
Built to Last
Fewer Grease Points
Tool-less Belt Removal
Specifications For Model : LZS801CKA60RA1
-
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
-
Drive Tires
24 x 12-12, 4 ply Turf Master®
-
Front Caster Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.
-
Caster Forks
.50" thick caster yoke arms.
-
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
-
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
-
Parking Brake
Lever-actuated disc brake.
-
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
-
Electrical
12-volt battery with 15-amp alternator.
-
Standard Features
Engine hour meter and cup holder
-
UPC
193308119700
-
Engine Brand
Kawasaki
-
Engine Model
FX801V
-
Engine Displacement
852
-
Engine Series
V-Twin
-
Engine Speed
3,750 RPM
-
Air Filter
Heavy-duty canister air filtration system
-
Fuel Type
Gas Carbureted
-
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
-
Fuel Indicator
Yes - electronic Sender
-
Drive
Hydro-Drive
-
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
-
Speed
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
-
Carb Compliant
Yes
-
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
-
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
-
ROPS
2-post foldable ROPS standard with seat belt and latch.
-
PTO Engagement
MagStop electromagnetic 200-ft-lb clutch with spot brake
-
Drive Wheel Release
Allows unit movement without engine running.
-
Engine Spec
_S04
-
Width / Cutting Deck
60"
-
Deck Style
Floating Deck
-
Deck Style Description
Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
-
Deck Construction
7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
-
Blade Tip Speed
Approximately 18,500 fpm.
-
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
-
Blades
3 Blades at 20.50" Length
-
Width
66.2 in. (168.1 cm)
-
Length
79.2 in. (211.1 cm)
-
Height
70.5 in. (179.1 cm)
-
Curb Weight
1287