72" Lazer Z Diesel
Zero Turn Mowers
Model LZS80TDYM724W0
Manufacturer Exmark
72" Lazer Z Diesel LZS80TDYM724W0
Description
When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.
Features
Improved Handling
Fuel Capacity
Tire Size / Ground Speed
On-Board Intelligence
Hydraulic Deck Lift
Productivity
Specifications For Model : LZS80TDYM724W0
-
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings top and bottom, and splined blade driver.
-
Drive Tires
26x12-12, 6ply
-
Front Caster Tires
15 x 6.0-6, smooth-tread, semi-pneumatic.
-
Caster Forks
.50" thick caster yoke arms.
-
Tractor Frame
Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
-
Steering Control
Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
-
Parking Brake
Lever-actuated internal wet disc brake.
-
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
-
Electrical
12-volt battery with 55-amp alternator.
-
Onboard Intelligence
RED Technology
-
Standard Features
12-volt plug-in, engine hour meter and cup holder
-
UPC
193308000787
-
Engine Brand
Yanmar
-
Engine Model
3TNV80FT
-
Engine Displacement
1267
-
Engine Series
TNV
-
Fuel System
Electronically Governed IDI Turbo Diesel
-
Engine Speed
2,600 RPM
-
Air Filter
Heavy-duty canister air filtration system with electronic vacuum sensor
-
Fuel Type
Diesel
-
Fuel Capacity
12-gallon (45.4-L), side fuel tanks
-
Fuel Indicator
Yes - mechanical float type
-
Drive
Hydro-Drive
-
Drive Description
Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler.
-
Speed
Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
-
Carb Compliant
Yes
-
Deck Lift
Hydraulic
-
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
-
ROPS
2-post foldable ROPS standard with seat belt and latch.
-
PTO Engagement
Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
-
Drive Wheel Release
Allows unit movement without engine running.
-
Engine Spec
ZMTR1
-
Width / Cutting Deck
72"
-
Deck Style
Floating Deck
-
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
-
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
-
Blade Tip Speed
Approximately 18,500 fpm
-
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
-
Blades
3 Blades at 24.50" Length
-
Width
84.9 in. (215.6 cm)
-
Length
99.6 in. (253.0 cm)
-
Height
71.8 in. (182.4 cm)
-
Curb Weight
1930
Hitch Kit
Hitch kit (NLZD)
Flasher Light Kit
LIGHT KIT
LED Light Kit (not compatible with 135-2473)
LIGHT KIT
Micro-Mulch System
The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf.
The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.
Operator Controlled Discharge (foot)
Operator Controlled Discharge (Foot)
Jack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
Trash Container (Not compatible with 135-7076)
Trash container (NLZD)
Slow Moving Vehicle Sign Kit
Slow moving sign kit (NLZD)
Sun Shade (ROPS)
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
Rear Guard and Bumper Kit
Protect your engine and enhance the appearance of your machine with this rear guard and bumper kit.
Jack Mount Receiver
RECEIVER-JACK MOUNT - Lazer Diesel
Turf Striping Kit
Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
UltraVac Completing Kit
UltraVac Completing Kit, 724-80T (NLZD)
UltraVac Collection System
UltraVac 3-Bagger Collection System (NLZD)