LAZER Z E-SERIES 52" Deck
Zero Turn Mowers
THE DEFINITION OF VALUE.
Model LZE751GKA524A2
Manufacturer Exmark
LAZER Z E-SERIES 52" Deck LZE751GKA524A2
Description
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z, but in a value package. Features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.
Features
Hydro Drive, Simplified
Unibody Frame
Less Time At The Pump
On-Board Diagnostics
Fewer Grease Points
Ultracut Series 4 Deck
Rear Discharge Deck
Tool-less Belt Removal
Specifications For Model : LZE751GKA524A2
Equipment |
|
Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
Drive Tires |
23 x 9.50-12, 4 ply Super Turf® |
Cup Holder |
Standard |
Tractor Frame |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
Steering Control |
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
Front Caster Tires |
13 x 5.0-6, smooth-tread, semi-pneumatic. |
Parking Brake |
Lever-actuated disc brake. |
Seat |
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position. |
Electrical |
12-volt battery with 15-amp alternator. |
Power Components |
|
Engine Brand |
Kawasaki® |
Engine Model |
FX751V |
Engine Displacement |
852 |
Engine Series |
V-Twin |
Engine Type |
Carbureted |
Engine Speed |
3,750 rpm |
Air Filter |
Heavy-duty canister air filtration system |
Fuel Type |
Gas Carbureted |
Fuel Capacity |
8-gallon (30.3-L) single fuel tank with single fill location. |
Fuel Indicator |
Yes - electronic Sender |
Drive |
Hydro-Drive |
Drive Description |
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
Speed |
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse. |
Carb Compliant |
No |
Deck Lift |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
Safety Package |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
ROPS |
2-post foldable ROPS standard with seat belt and latch. |
PTO Engagement |
MagStop electromagnetic 200-ft-lb clutch with spot brake |
Drive Wheel Release |
Allows unit movement without engine running. |
Casters |
.50" thick caster yoke arms. |
Decks |
|
Width / Cutting Deck |
52" |
Deck Style |
Floating Deck |
Deck Style Description |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Deck Construction |
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
Blade Tip Speed |
Approximately 18,500 fpm. |
Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
Blades |
3 Blades at 18.0" Length |
Dimensions |
|
Width |
64.8 in. (164.6 cm) |
Length |
79.2 in. (201.2 cm) |
Height |
70 in. (177.8 cm) |